|
MW Industries has its own 10.5ft by 60ft paint booth, equipt with temperature control and filters. A full length carrier can be put inside the booth, with adequate room to move around for proper preping, priming and painting. All critical rig components are thoroughy washed and sand blasted before paint. The painting application process consists of:
Primer Coat - uses a DuPont satin high solid epoxy primer, 3 mils thick.
Top Coat - high gloss polyurethane 2 mils thick, OR metallic and/or pearl optional 2 mils thick.
Clear Coat - the unit is finish coated with up to two non-metallic clear coats. Heavy-duty performance finish coat is DuPont 3-4 mils thick.
   
|
|
